Certified inspectors, thermal imaging, and same-day lab results

Mold Inspection near me in SYLMAR, California

If you smell something musty or spot dark staining on drywall, our Mold Inspection near me in SYLMAR, California finds the source fast. We run moisture meters, thermal imaging cameras, and spore trap samplers through every room, attic, and crawl space. Homeowners, landlords, and business owners across the San Fernando Valley call us because we tell you exactly what is growing, where it started, and what it takes to fix it.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service near me for SYLMAR homes
Careful work. Honest options.
About this service

What Mold Inspection near me in SYLMAR, California Covers

A Mold Inspection near me in SYLMAR, California is a full visual and instrument-based evaluation of your property for active mold growth and the moisture feeding it. We walk the structure room by room with a moisture meter and thermal imaging camera, then check the attic, crawl space, and HVAC system for hidden contamination. Air and surface samples go to an accredited lab, and you get a written report with spore counts, photos, and a clear scope of work.

Sylmar sits in a dry, windy pocket of the San Fernando Valley, but that does not stop mold. Winter rain pushes water through 1950s stucco and flat roofs, and summer humidity builds up in crawl spaces and garages. We see black mold growth behind bathroom tile, attic mold after a roof leak, and HVAC mold contamination in homes near the Pacoima Wash Area. A certified mold assessment SYLMAR California gives you proof before you spend money on repairs.

  • ✓ Find the Source Fast
  • ✓ Lab-Backed Proof
  • ✓ Stop Damage Before It Spreads
  • ✓ Clear Next Steps
What's included

What Our Mold Inspection Includes

Every Mold Inspection near me in SYLMAR, California includes a full visual assessment, moisture mapping, thermal imaging, and air sampling. We document everything in a written report with photos and lab data. Remediation is quoted separately so you can see the inspection findings on their own and decide what to do next.

✓

Full Visual Assessment

We inspect every accessible area, including the attic, crawl space, bathrooms, kitchen, laundry, and HVAC system. We look for visible growth, water staining, warped materials, and musty odors that point to hidden contamination.

✓

Moisture Mapping

A moisture meter is used on walls, ceilings, floors, and framing to find elevated readings. We map wet areas and compare them to dry reference points so you can see exactly where the moisture is coming from.

✓

Thermal Imaging Scan

A thermal imaging camera reveals temperature differences behind walls and under floors that indicate trapped moisture. This is how we find leaks and hidden mold growth without cutting into finished surfaces.

✓

Air and Surface Sampling

We collect air samples with a spore trap sampler and surface samples from visible growth. Samples go to an accredited lab for species identification and spore counts. Results typically come back in 24 to 48 hours.

✓

Written Report with Photos

You get a full report with moisture readings, thermal images, lab data, and photos tied to specific locations. The report is written for property owners, not contractors, so you can understand it without a translator.

✓

Scope of Work Recommendation

If remediation is needed, we provide a written scope that separates inspection from cleanup. You can use it to compare bids or hire us. If no remediation is needed, we tell you that too and explain what to monitor.

How it works

How Our Mold Inspection Process Works

01

Phone Intake

Call (833) 929-5837 and tell us what you are seeing or smelling. We ask about recent leaks, flooding, roof damage, or HVAC issues. You get a same-day or next-day appointment window, and we confirm pricing before we roll a truck.

02

On-Site Walkthrough

A certified inspector walks the property with a moisture meter, thermal imaging camera, and boroscope inspection camera. We check every room, the attic, crawl space, bathrooms, and HVAC system. This stage usually takes 60 to 90 minutes for an average Sylmar home.

03

Sampling and Documentation

We collect air samples with a spore trap sampler and surface samples from visible growth. Photos document each finding with a reference point. Samples are sealed, labeled, and sent to an accredited lab the same day.

04

Lab Analysis

The lab cultures and identifies mold species and spore counts. Results come back in 24 to 48 hours. We compare indoor counts against an outdoor baseline to confirm whether the air inside your home is elevated.

05

Written Report and Walkthrough

You get a full report with photos, lab data, moisture readings, and a recommended scope of work. We walk you through it by phone or in person. If remediation is needed, we explain options and scheduling. If it is not, we tell you that too.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

Measures moisture content in drywall, wood, and framing. We use it to find elevated readings that indicate hidden leaks or high humidity behind finished surfaces.

Thermal Imaging Camera

Reveals temperature differences caused by trapped moisture. It lets us find leaks and hidden mold growth without cutting into walls or ceilings.

Boroscope Inspection Camera

A small camera on a flexible probe that lets us see inside wall cavities, behind baseboards, and inside HVAC ducts without demolition.

Spore Trap Sampler

Collects air samples for lab analysis. We use it to measure airborne spore counts and identify mold species present in the indoor air.

Air Scrubber

Filters airborne spores and particles during remediation. We use Abatement Technologies units with HEPA filters to keep containment areas under negative pressure.

HEPA Vacuum

Removes settled spores from surfaces without spreading them. We use ProTeam HEPA vacuums on framing, floors, and contents after removal work.

Dehumidifier

Pulls moisture out of the air to dry structures after water damage. We use Dri-Eaz and Phoenix Restoration units to bring materials back to normal moisture levels.

Real results

Before and after.

Attic Mold After Roof Leak

Before

A homeowner on Glenoaks Boulevard noticed a musty smell in the hallway. The attic had visible black mold growth on roof decking and saturated insulation from a slow roof leak that had been active for months.

After

We documented the leak source with thermal imaging, collected samples, and wrote a remediation scope. After remediation, air samples showed spore counts back to normal baseline. The homeowner had the roof repaired and insulation replaced.

Crawl Space Mold and High Humidity

Before

A property manager on the San Fernando Road Corridor reported a musty smell in a ground-floor unit. The crawl space had no vapor barrier, relative humidity was 72 percent, and mold was growing on joists and subfloor.

After

We installed a vapor barrier, removed contaminated insulation, treated framing with antimicrobial solution, and verified with post-remediation mold testing. Humidity dropped to 48 percent and stayed there.

Bathroom Mold from Slow Leak

Before

A homeowner in Sylmar Terrace had recurring mold around the shower for over a year. Cleaning helped for a few weeks, then it came back. The moisture meter showed elevated readings behind the tile from a slow drain leak.

After

We documented the leak with thermal imaging, collected surface samples, and scoped the remediation. After repair and remediation, post-remediation mold testing confirmed clearance. The mold has not returned.

Problems we solve

Mold Problems We Solve in Sylmar

Most mold calls start with a smell, a stain, or a health symptom. Here are the problems we see most often in Sylmar homes and businesses.

Ask a pro →
01

Musty odor with no visible mold

We use thermal imaging and a boroscope inspection camera to find growth inside walls and under floors without demolition. Air sampling confirms whether spore counts are elevated. You get a precise location and a scope before any cutting begins.

↗
02

Recurring bathroom mold after cleaning

We trace the moisture with a meter and check ventilation rates. Then we remove contaminated material, treat framing with antimicrobial solution, and correct the source. Bathroom mold removal service in Sylmar starts with fixing the water, not just the stain.

↗
03

Attic mold after a roof leak

We inspect the attic with a moisture meter and thermal camera, sample the growth, and document the roof leak source. If remediation is needed, we contain the area, remove contaminated insulation, and treat the framing. Post-remediation mold testing confirms clearance.

↗
04

Crawl space mold and high humidity

We measure moisture in the joists and subfloor, check for plumbing leaks, and sample the growth. Remediation includes removing contaminated material, treating framing, and installing a containment barrier or vapor barrier to keep humidity down.

↗
Proof you can check

Licensed, Certified, and Local

✓
IICRC CertificationInstitute of Inspection, Cleaning and Restoration Certification
✓
ACAC CertificationAmerican Council for Accredited Certification
✓
EPA Mold Remediation GuidelinesU.S. Environmental Protection Agency
✓
California Department of Public Health Mold GuidelinesCalifornia Department of Public Health
✓
OSHA Safety ComplianceOccupational Safety and Health Administration
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most residential inspections run $250 to $650 in 2026, depending on square footage and how many samples you need. A basic visual inspection with two air samples starts around $250. Larger homes, crawl spaces, and commercial properties run higher. We quote flat pricing before we schedule, so you know the number before we arrive.

Look for IICRC or ACAC certification, a state contractor license, and a written report with lab data. Ask whether the inspector also does remediation. We do both, but we separate the scopes so you can see the inspection findings on their own. A good inspector tells you what is not mold, too.

A typical single-family home takes two to four hours on site. That includes the walkthrough, moisture readings, thermal imaging, and sample collection. Lab results come back in 24 to 48 hours. Larger properties, crawl spaces, and commercial buildings can run four to six hours.

California does not require a mold inspection before sale, but buyers often ask for one after a home inspection flags moisture. A pre-listing mold evaluation near me SYLMAR CA gives you documentation to negotiate from. If mold is found, you can remediate on your schedule instead of the buyer's.

Ready when you are

Schedule Your Mold Inspection near me in SYLMAR, California

Call (833) 929-5837 and we will get an inspector to your Sylmar property, often the same day. Flat pricing, certified inspectors, and lab results in 24 to 48 hours. If you smell something musty, do not wait.

Book Inspection (833) 929-5837 →
Request an appointment

Contact Our Sylmar Team

Call (833) 929-5837 or send us a message and we will get back to you the same day. Our phones are answered 24 hours for emergencies, and regular inspections are scheduled Monday through Friday. Tell us what you are seeing or smelling, and we will tell you what the next step is.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837