Licensed mold assessor in SYLMAR California for homes and businesses

Certified Mold Inspector in SYLMAR, California

A Certified Mold Inspector in SYLMAR, California is who you call when a musty smell, a water stain, or a failed home inspection needs a real answer. We are a licensed mold assessor SYLMAR California property owners trust for moisture mapping, spore trap sampling, and a written report you can hand to a buyer, lender, or landlord. Same-day appointments available.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Quality Certified Mold Inspector in SYLMAR
Careful work. Honest options.
About this service

Certified Mold Inspector in SYLMAR, California

A Certified Mold Inspector in SYLMAR, California is a trained, credentialed professional who locates and documents mold growth and the moisture feeding it. We use a moisture meter, thermal imaging camera, and boroscope inspection camera to trace water behind drywall, under flooring, and inside wall cavities. We collect air and surface samples with a spore trap sampler, send them to an accredited lab, and deliver a written report with lab results, photos, and a scope of work. No guessing, no scare tactics.

SYLMAR homes sit in a hot, dry valley that swings hard between summer heat and winter rain. That cycle drives water damage from leaks, high indoor humidity, and crawl space mold in older ranch houses along Hubbard Street and El Dorado Avenue. If you search for a certified mold inspector near me SYLMAR California, you want someone who reads the building, not just the smell. We inspect the attic, crawl space, HVAC, and bathrooms in one visit.

  • ✓ Lab-Backed Written Report
  • ✓ Same-Day and 24/7 Response
  • ✓ Licensed and Certified Assessors
  • ✓ Honest, Affordable Pricing
What's included

What Our Certified Mold Inspection Includes

Every inspection is a full-property assessment, not a quick walkthrough. Here is what is covered in the base price, and what we can add on if your situation calls for it. Sampling beyond the standard package is quoted upfront before we start.

✓

Full Visual Survey

We inspect every room, the attic, the crawl space, the basement, and the HVAC system for visible growth, water stains, and musty odors. Every suspect area is photographed and noted in the report with a moisture reading.

✓

Moisture Mapping

A moisture meter and thermal imaging camera trace water behind walls, under floors, and above ceilings. We identify the source, whether it is a roof leak, plumbing drip, or high indoor humidity. Without fixing the source, mold returns.

✓

Air and Surface Sampling

We set a spore trap sampler in each affected room plus one outdoor control, and take tape or swab samples from visible growth. Samples go to an accredited lab under chain of custody. Results include species identification and spore counts.

✓

Written Report with Lab Results

You get a PDF report with lab results, moisture readings, photos, and a recommended scope of work. Reports are formatted for real estate disclosures, insurance claims, and contractor bids. Delivered within 24 to 48 hours.

✓

Phone Walkthrough

After the report is delivered, we call you to explain the findings in plain language. You can ask questions, and we will tell you what needs to be fixed and what can wait. No pressure to book remediation with us.

✓

Optional Post-Remediation Testing

If you have already had cleanup done, we can re-sample the same areas and compare to a baseline. This clearance testing confirms the remediation worked and gives you documentation for your records or your lender.

How it works

What to Expect During Your Inspection

01

Phone Intake

We ask about the smell, the water event, and the rooms involved. You get a flat quote for the inspection and a two-hour arrival window. If it is an emergency, we roll a truck the same day. Most calls are booked within 24 hours.

02

Visual and Moisture Survey

We walk the property with a moisture meter and thermal imaging camera, checking drywall, baseboards, and ceilings for hidden moisture. A boroscope inspection camera goes into wall cavities and behind cabinets. We photograph every suspect area and note the readings.

03

Air and Surface Sampling

We set a spore trap sampler in each affected room plus one outdoor control, and take tape or swab samples from visible growth. Samples go to an accredited lab under chain of custody. Sampling usually adds 30 to 45 minutes to the visit.

04

Lab Analysis and Report

The lab returns results in 24 to 48 hours. We build a written report with spore counts, species identified, moisture readings, photos, and a recommended scope of work. You get a PDF and a phone walkthrough of the findings.

05

Scope and Next Steps

If remediation is needed, we outline the containment, HEPA vacuuming, and antimicrobial solution steps required. If it is a small area, we explain what you can handle yourself. If it is a larger job, we hand off to our remediation crew or your contractor of choice.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

Pin and pinless meters measure moisture content in drywall, wood, and flooring. They tell us where water is hiding, even when the surface feels dry to the touch.

Thermal Imaging Camera

Infrared cameras reveal temperature differences behind walls and under floors, which often indicate trapped moisture or hidden leaks. We use it to map the extent of a water event.

Boroscope Inspection Camera

A flexible camera goes into wall cavities, behind cabinets, and inside HVAC ducts. It lets us see growth and moisture without cutting open the wall.

Spore Trap Sampler

We use spore trap cassettes to capture airborne mold spores over a set period. Samples go to an accredited lab for species identification and spore count analysis.

Air Scrubber and HEPA Vacuum

When we find active growth, we deploy an air scrubber with HEPA filters and a HEPA vacuum to capture spores and prevent cross-contamination during the inspection or remediation.

Dehumidifier

For active water events, we bring a Dri-Eaz or Phoenix Restoration dehumidifier to pull moisture out of the air and stop mold from spreading before remediation begins.

Fogging Machine

A fogging machine applies Benefect or Concrobium to hard-to-reach surfaces like crawl space joists and HVAC plenums. It supplements physical removal, it does not replace it.

Real results

Before and after.

Attic Mold from a Roof Leak

Before

A homeowner on Bledsoe Street noticed a faint stain on the ceiling after winter rain. The attic had visible black mold growth on the roof deck and insulation, with moisture readings above 20 percent in the sheathing. The leak had been active for weeks.

After

We documented the growth with photos and lab sampling, then our remediation crew removed the contaminated insulation, HEPA vacuumed the area, and treated the deck with antimicrobial solution. Post-remediation testing confirmed clearance. The roof was repaired by a licensed roofer.

Crawl Space Mold in a 1958 Ranch Home

Before

A home on Hubbard Street had a musty odor in the living room that got worse in summer. The crawl space had no vapor barrier, moisture readings of 22 percent on the floor joists, and visible mold growth across roughly 200 square feet of subfloor and framing.

After

We installed a vapor barrier, removed the contaminated material, HEPA vacuumed the space, and applied antimicrobial solution to the joists. Post-remediation air sampling showed spore counts back to normal levels. The musty odor was gone within a week.

Bathroom Mold Recurrence Fixed

Before

A tenant on Glenoaks Boulevard had cleaned black mold growth from the bathroom corner four times in a year. Each time it returned within a month. The moisture meter showed elevated readings behind the tile, and the exhaust fan was venting into the attic instead of outside.

After

We documented the leak behind the tile and the failed exhaust fan, then provided a scope for repair. After the leak was fixed and the fan was re-ducted to the exterior, we treated the area with antimicrobial solution. No recurrence in the following year.

Problems we solve

Mold Problems We Solve for SYLMAR Homeowners

Mold is a symptom, not the problem. The real issue is almost always moisture, and it is usually hidden. Here are the situations we run into most often in SYLMAR and how we handle them.

Ask a pro →
01

Musty odor with no visible mold

We use a thermal imaging camera and boroscope inspection camera to find the moisture source, then sample the air with a spore trap sampler. The lab identifies the species and concentration, and we document the hidden growth location for remediation.

↗
02

Black mold growth after a roof leak

We inspect the attic deck, rafters, and insulation, sample the growth, and trace the leak path. The report identifies the extent and gives you a scope for removal. We can also handle the remediation with containment and HEPA vacuuming.

↗
03

Crawl space mold from high humidity

We inspect the joists and subfloor, measure moisture content, and sample any growth. The report recommends a vapor barrier and ventilation fix. If remediation is needed, we remove contaminated material and treat with antimicrobial solution.

↗
04

Bathroom mold that keeps coming back

We check the caulk lines, grout, and wall cavity with a moisture meter and boroscope. Once we find the leak or ventilation issue, we document it and give you a scope that fixes the cause, not just the surface.

↗
Proof you can check

Licensed, Certified, and Accountable

✓
IICRC CertificationInstitute of Inspection, Cleaning and Restoration Certification
✓
ACAC CertificationAmerican Council for Accredited Certification
✓
State Contractor LicenseCalifornia Contractors State License Board
✓
EPA Mold Remediation GuidelinesU.S. Environmental Protection Agency
✓
OSHA Safety ComplianceOccupational Safety and Health Administration
Good questions

Frequently Asked Questions

(833) 929-5837 →

Ask for their IICRC certification and ACAC certification numbers, their state contractor license, and proof of liability insurance. A legitimate assessor will provide these before the inspection. You can also confirm IICRC credentials through the IICRC website. If someone hesitates or gives you a verbal-only answer, that is a red flag. Our team provides documentation on request and follows California Department of Public Health mold guidelines.

California does not issue a standalone mold assessor license, so look for a state contractor license plus third-party certifications like IICRC or ACAC. Those certifications require training, testing, and continuing education. A licensed mold assessor in SYLMAR CA should also carry liability insurance and follow EPA mold remediation guidelines for sampling and reporting. Ask to see the certificate, not just the logo on the truck.

In 2026, a standard home mold inspection in SYLMAR runs $250 to $650, depending on square footage and how many samples are needed. A single-room check with two samples sits at the low end. A full home with attic, crawl space, and HVAC sampling sits at the high end. Emergency and same-day calls may add a trip charge. We quote the full price before we start.

A certified mold evaluation SYLMAR California includes a visual survey, moisture meter and thermal imaging camera readings, boroscope inspection of wall cavities, air and surface sampling with a spore trap sampler, and a written report with lab results. We also note the moisture source, because mold will return if the water problem is not fixed. Reports are delivered within 24 to 48 hours.

Ready when you are

Book a Certified Mold Inspector in SYLMAR, California

If you smell something musty or you are staring at a water stain that keeps coming back, get a real answer. Call (833) 929-5837 and we will schedule a certified mold evaluation with report SYLMAR CA. Same-day and 24/7 emergency appointments available.

Schedule Inspection (833) 929-5837 →
Request an appointment

Contact Our Sylmar Team

Call (833) 929-5837 or send us a message and we will get back to you the same day. Our phones are answered 24 hours for emergencies, and regular inspections are scheduled Monday through Friday. Tell us what you are seeing or smelling, and we will tell you what the next step is.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837